Updated 07/16/08
Round Bar Without Mill Test Reports
| Size | wt Lbs | Tag # | Heat No. | Comments |
| 8.04" DIA x 21.25" | 176 | 8284 | R - 7643 | |
| 8.13" DIA x 26.5" | 224 | 8284 | 82774 | marked AMS 4928 F, Mil T 9046 |
| 11.72" DIA x 6.75" | 119 | 8284 | X7940 |
Plate/ Flatbar with no Mill Test Reports
| Size (in) |
Wt (lbs) |
Tag No. |
Heat No. | Comments |
| 0.020" x 24" x 45" | 3 | 8162 | R-4960 | Marked Timetal 6-2-4-2 duplex annealed, AMS 4919C |
| 0.030" x 36" x 48 | 9 | 8162 | 937-0307 | LAI, marked 6-2-4-2 annealed, AMS 4919A |
| .071" x 44' x 72.5" 2 pcs | 77 | 8162 | 8601565 | RMI, Marked 6-2-4-2 Dup annealed, AMS 4919C |
| 1" x 2" x 30" |
10 |
7388 | HC 7283 | Howmet |
| 1.5" x 8" x 26" | 53 | 7810 | NO HT | |
| 1.5" x 4" x 24.5" | 24 | 7388 | DP53 | Teledyne, marked Mil-T-9047G |
| 1.5" x 9.25" x 38.5" | 87 | 7548 | NO HT # | |
| 2.00" X 3.0" X 19.75" | 19 | 7548 | D961519 | SAW CUT ENDS |
| 2.00" X 3.0" X 17.0" | 17 | 7548 | D961519 | SAW CUT ENDS |
| 2.0" X 4.25" X 14.70" | 21 | 7548 | T433 | |
| 2.00" X 10.25" X 16" | 111 | 5261/RR4726 | NO HT# | SAW CUT ENDS - 2 pcs |
| 2.00" X 2.500" X 35" | 29 | 5887/RR4841 | NO HT# | Mil T 9047G |
| 2.00" X 4.25" X 18.5" | 26 | 7548 | 864386 | SAW CUT ENDS |
| 2.00" X 6.0" X 18.75" | 37 | 7548 | HC8950 | |
| 2" x 8" x 13.5" | 35 | 7810 | NO HT | |
| 3.00" X 3.50" X 12.0" | 21 | 7548 | 884732 | SAW CUT ENDS |
| 3.25" x 7" x 11" | 41 | 7548 | NO HT # | |
| 3.25" x 7" x 14.75" | 55 | 7548 | NO HT # |
- Some weights shown are estimates